Unit of Measure
Specifications
Construction |
N/A Conductor: Solid Silver Plated Copper Dielectric: PTFE Tape Inner Braid: Flat Silver Plated Copper 90% min. coverage Jacket: Green Tint FEP Marker Tape: "Harbour Industries LL305 27478" Outer Braid: Round Silver Plated Copper 90% min. coverage |
Center Conductor |
N/A 0.091 ± 0.004 in |
Dielectric Diameter |
N/A 0.246 ± 0.005 in |
Diameter Over Inner Braid |
N/A 0.256 ± 0.005 in |
Diameter Over Outer Braid |
N/A 0.276 ± 0.005 in |
Overall Diameter |
N/A Max. 0.305 in |
Weight |
N/A 74.0 lb/1000 ft. |
Min. Recommended Bend Radius |
N/A 1.50 in |
Minimum Continuous Length |
N/A 100 ft |
Put-up |
N/A 30 inch wood, multiple lengths per spool |
Operating Temperature |
N/A -55 to +200 ºC |
RoHS Compliance |
N/A Complies with RoHS (Directive 2002/95/EC) |
Test Method |
N/A Connector Type: Male SMA plug IF Band Width: 35 Khz k1= (0.1266), k2= (0.0001674) Sampling Plan: PerMil-STD-105 Sweep Time: 6 Sec Test Length: 10 ft Test Points: 801 |
Electrical Characteristics
Impedance |
N/A 50 ±2 ohms |
Capacitance |
N/A 24.0 pF/ft |
Velocity of Propagation |
N/A 84.5 % |
VSWR (Max 400 MHz to 18 GHz) |
N/A 1.35:1 (Gated) |
Attenuation @ 400 MHz per 100 ft. |
N/A Typical: 2.6 dB |
Attenuation @ 1 GHz per 100 ft. |
N/A Typical: 4.2 dB |
Attenuation @ 3 GHz per 100 ft. |
N/A Typical: 7.4 dB |
Attenuation @ 5 GHz per 100 ft. |
N/A Typical: 9.8 dB |
Attenuation @ 10 GHz per 100 ft. |
N/A Typical: 14.3 dB |
Attenuation @ 18 GHz per 100 ft. |
N/A Typical: 20.0 dB |