Made in compliance with MIL SPEC QQ-B575 (as revised). Braid is formed so as to maintain coverages of 90% shielding, (70% for 0.78 and smaller), over the nominal diameters specified. The tinned Copper used in the braid conforms to ASTM B 33 standard.
Note: It may not possible to produce 90% coverage on these constructions.
Note: It may not possible to produce 90% coverage on these constructions.
Unit of Measure
Specifications
Type |
N/A Tubular |
Plating |
N/A Tinned Copper |
Mil-Spec No. |
N/A AA-59569-34-109 QQB575-34-109 (old) |
Strand Wire Size (AWG) |
N/A 34 AWG |
Tubular Nominal Inside Diameter |
N/A 0.109 in |
Tolerance |
N/A 0.016 in |
Number of Carriers |
N/A 16 |
Number of Wires per Strand |
N/A 4 |
Number of Ends |
N/A 64 |
Current Rating1 | N/A 19.0 A |
Approx. AWG Equivalent2 | N/A 16 |
Number of Tubular |
N/A 134 |
- 1 Direct current ratings are given for information only and are not requirements. Values shown are for uninsulated braid in free air at 30ºC. Values should be derated if the braid is insulated or in close contact with other components.
- 2 Approximate AWG equivalents are given for information only and are not requirements.