Super Lightweight Cables XLETFE 150°C/450 V
Conductors: Conductor shall be built per Whitmor/Wirenetics drawing SLT-1.
Cabling: The required number of conductors, determined by the cable designation, will be cabled with a left-hand lay. The lay length of the individual conductors shall be not less than 8 nor more than 16 times the outside major axis diameter of the unshielded, unjacketed cable.
Shield: When a shielded construction is called for in the cable designation, either a closely woven round strand braid or a flat strand braid will be used over the conductors.
Jacket: When a jacketed construction is called for in the cable designation, the wall thickness will be a nominal of .004" - .008" of either ETFE or irradiation crosslinked ETFE.
Conductors: Conductor shall be built per Whitmor/Wirenetics drawing SLT-1.
Cabling: The required number of conductors, determined by the cable designation, will be cabled with a left-hand lay. The lay length of the individual conductors shall be not less than 8 nor more than 16 times the outside major axis diameter of the unshielded, unjacketed cable.
Shield: When a shielded construction is called for in the cable designation, either a closely woven round strand braid or a flat strand braid will be used over the conductors.
Jacket: When a jacketed construction is called for in the cable designation, the wall thickness will be a nominal of .004" - .008" of either ETFE or irradiation crosslinked ETFE.
Unit of Measure
Specifications
Max. Diameter |
N/A 0.100 in |
Max. Weight |
N/A 8.95 lb/1000 ft. |
Percentage of Shield Coverage |
N/A 85 % |
Color Code |
N/A (-) White Base with Stripes |
Color |
N/A
|
Conductor Type |
N/A Silver Plated HSCA |
# of Conductors |
N/A 5 |
Shield Type |
N/A No Shield |
Jacket Type |
N/A Unjacketed |