Made in compliance with MIL-SPEC QQ-B-575 (as revised). Braid is formed so as to maintain coverages of 90% shielding, (70% for 0.78 and smaller), over the nominal diameters specified.
Tinned Copper Plated: The tinned copper used in the braid conforms to ASTM B33 standard.
Silver Plated: Individual wires are silver plated copper wires, conforming to ASTM B298 standard, with 40 micro inches minimum of silver plating. Excellent for use at temperatures exceeding 200°C or where special resistance to corrosion is required.
Tinned Copper Plated: The tinned copper used in the braid conforms to ASTM B33 standard.
Silver Plated: Individual wires are silver plated copper wires, conforming to ASTM B298 standard, with 40 micro inches minimum of silver plating. Excellent for use at temperatures exceeding 200°C or where special resistance to corrosion is required.
Unit of Measure
Specifications
Type |
N/A Tubular |
Plating |
N/A Silver |
Mil-Spec No. |
N/A AA-59569-34-203 QQB575-34-203 (old) |
Strand Wire Size (AWG) |
N/A 34 AWG |
Tubular Nominal Inside Diameter |
N/A 0.203 in |
Tolerance |
N/A 0.016 in |
Number of Carriers |
N/A 24 |
Number of Wires per Strand |
N/A 8 |
Number of Ends |
N/A 192 |
Current Rating1 | N/A 46.0 A |
Approx. AWG Equivalent2 | N/A 11 |
Number of Tubular |
N/A 170/1 |
- 1 Direct current ratings are given for information only and are not requirements. Values shown are for uninsulated braid in free air at 30ºC. Values should be derated if the braid is insulated or in close contact with other components.
- 2 Approximate AWG equivalents are given for information only and are not requirements.