Made in compliance with MIL SPEC QQ-B575 (as revised). Braid is formed so as to maintain coverages of 90% shielding, (70% for 0.78 and smaller), over the nominal diameters specified. The tinned Copper used in the braid conforms to ASTM B 33 standard.
Note: Flat form width and thickness are given for information only and are not requirements.
Note: Flat form width and thickness are given for information only and are not requirements.
Unit of Measure
Specifications
Type |
N/A Flat |
Plating |
N/A Silver |
Mil-Spec No. |
N/A AA-59569-36-031 QQB575-36-031 (old) |
Strand Wire Size (AWG) |
N/A 36 AWG |
Tubular Nominal Inside Diameter |
N/A 0.031 in |
Tolerance |
N/A 0.010 in |
Number of Carriers |
N/A 24 |
Number of Wires per Strand |
N/A 1 |
Number of Ends |
N/A 24 |
Current Rating1 | N/A 7.0 A |
Approx. AWG Equivalent2 | N/A 22 |
Nom. Flat Form Width x Thickness3 | N/A 0.046 x 0.020 in |
Number of Flat |
N/A 223 |
- 1 Direct current ratings are given for information only and are not requirements. Values shown are for uninsulated braid in free air at 30ºC. Values should be derated if the braid is insulated or in close contact with other components.
- 2 Approximate AWG equivalents are given for information only and are not requirements.
- 3 Flat form width and thickness are given for information only and are not requirements.